Raspberry PI

Making an arduino board holder from ply & wood

By dave on November 23, 2017

Making a nice case for an Arduino board can range from the simplest possible case, a piece of plywood the right size, with a few holes to mount the board, right through to an intricate box with closing lid etc. This one probably falls in the middle somewhere. Why another Arduino board holder you ask? Now that my son has taken up the same hobby as me, having started with scratch and a bit of python, he fancies his hand at Arduino.

Building a holder for my Arduino board

By dave on April 27, 2014

<img class=" titleimg" alt="complete arduino holder" src="/images/electronics/arduino/holder/board-assembled.jpg"/> After almost shorting out my Arduino with a piece of wire that was left under the circuit board, I decided it was time to mount it onto a proper support board along with the breadboard I often use with it. Okay I could go out and buy one, but I had a nice piece of high grade birch plywood in the garage (left over from building a pair of speakers).

This site uses cookies to analyse traffic, serve ads by Google AdSense (non-personalized in EEA/UK), and to record consent. We also embed Twitter, Youtube and Disqus content on some pages, these companies have their own privacy policies.

Our privacy policy applies to all pages on our site

Should you need further guidance on how to proceed: External link for information about cookie management.