ShiftRegisterIoAbstraction165In Class Reference

Inheritance diagram for ShiftRegisterIoAbstraction165In:

Public Member Functions
	ShiftRegisterIoAbstraction165In (pinid_t readClockPin, pinid_t readDataPin, pinid_t readLatchPin, pinid_t numRead)
	ShiftRegisterIoAbstraction165In (ShiftRegConfig config)
void	initDevice ()
void	pinDirection (pinid_t pin, uint8_t mode) override
uint8_t	readValue (pinid_t pin) override
bool	runLoop () override
uint8_t	readPort (pinid_t port) override
void	writePort (pinid_t port, uint8_t portVal) override
void	writeValue (pinid_t pin, uint8_t value) override
void	attachInterrupt (pinid_t, RawIntHandler, uint8_t) override
uint8_t	shiftInFor165 () const
Public Member Functions inherited from BasicIoAbstraction
uint8_t	digitalRead (pinid_t p)
void	digitalWrite (pinid_t p, uint8_t v)
uint8_t	digitalReadS (pinid_t p)
void	digitalWriteS (pinid_t p, uint8_t v)
void	writePortS (pinid_t p, uint8_t v)
uint8_t	readPortS (pinid_t p)
void	pinMode (pinid_t pin, uint8_t mode)
bool	sync ()

Constructor & Destructor Documentation

ShiftRegisterIoAbstraction165In()

ShiftRegisterIoAbstraction165In::ShiftRegisterIoAbstraction165In	(	pinid_t	readClockPin,
		pinid_t	readDataPin,
		pinid_t	readLatchPin,
		pinid_t	numRead )

Normally use the shift register helper functions to create an instance.

See also

inputOutputFromShiftRegister

inputOnlyFromShiftRegister

outputOnlyFromShiftRegister

Member Function Documentation

pinDirection()

void ShiftRegisterIoAbstraction165In::pinDirection ( pinid_t pin, uint8_t mode )

inlineoverridevirtual

Input only abstraction, does nothing because only input is supported

Reimplemented from BasicIoAbstraction.

readValue()

uint8_t ShiftRegisterIoAbstraction165In::readValue ( pinid_t pin )

overridevirtual

Reads a value from a pin for this abstraction as per digitalRead. For serial devices may need a sync first.

Parameters

pin	the pin to be read

Reimplemented from BasicIoAbstraction.

runLoop()

bool ShiftRegisterIoAbstraction165In::runLoop ( )

overridevirtual

This method is not needed on Arduino pins, but for most serial implementations it causes the device and abstraction to be synced. Returns true if the write call worked, normally true, false indicates error

Reimplemented from BasicIoAbstraction.

readPort()

uint8_t ShiftRegisterIoAbstraction165In::readPort ( pinid_t pin )

overridevirtual

Reads a whole port at once, on Arduino pins this is achieved by providing any pin within that port. On Arduino pins you should take care not to use ports that are providing core functions.

Parameters

pin	the pin determines the hardware port to use.

Returns

the 8 bit value read from the port.

Reimplemented from BasicIoAbstraction.

writePort()

void ShiftRegisterIoAbstraction165In::writePort ( pinid_t pin, uint8_t portVal )

inlineoverridevirtual

Writes out a whole port at once, on Arduino pins this is achieved by providing any pin within that port. On Arduino pins you should take care not to use ports that are providing core functions.

Parameters

pin	the pin determines the hardware port to use.
portVal	the 8 bit value to write to the port. Use with care.

Reimplemented from BasicIoAbstraction.

writeValue()

void ShiftRegisterIoAbstraction165In::writeValue ( pinid_t pin, uint8_t value )

inlineoverridevirtual

Writes a value to a pin on this abstraction, as per digitalWrite. For serial devices, may need a sync first.

Parameters

pin	the pin to be written to
value	the new value such as HIGH / LOW

Reimplemented from BasicIoAbstraction.

attachInterrupt()

void ShiftRegisterIoAbstraction165In::attachInterrupt ( pinid_t pin, RawIntHandler interruptHandler, uint8_t mode )

inlineoverridevirtual

Attach an interrupt to this abstraction, regardless of the device location this will perform the required tasks to register the interrupt in the requested mode. Note that not all devices can support all modes, for arduino pins all modes are supported.

Parameters

pin	the pin on this device to be used
intHandler	a void function with no parameters, used to handle interrupts. THIS IS A RAW INTERRUPT AND NOT MARSHALLED
mode	standard Arduino interrupt modes: CHANGE, RISING, FALLING

Reimplemented from BasicIoAbstraction.

---

The documentation for this class was generated from the following files:

• src/IoAbstraction.h
• src/IoAbstraction.cpp